SMT processing chip is how points are calculated

- Dec 02, 2016-

1. General two pads a little resistance capacitance, usually 0603 and 0805 is a point.

2.SMT processing a triode-1.5 points.

3. small four-PIN SOP for a point, giant three PIN IC for one point, BGA according to the density of the solder ball 3 ball to a point, some manufacturers 2 solder balls for a point.

Agreed with 4.SMT processing of special components.

Previous:SMT processing of solder paste considerations Next:Due to a bad pass, and multilayer printed circuit board structure of high density interconnect reliability will bring a series of technical problems.